A
A-2 Print Options
Where to set print options
•During Setup
Some settings are specified during Setup by the administrator. For information on
the current default server settings, contact the administrator or the operator.
• From applications
With the printer drivers, you can specify job settings when you print a job. For
information about specifying job settings from applications, see Chapters 1 and 2.
• From Fiery Downloader
Only a few settings—Copies, Page Range (for PDF files only), and Brightness (for
PostScript and EPS files only)—can be specified when printing jobs with Fiery
Downloader. To change options in Fiery Downloader, select a job in the Files to be
Downloaded (Windows) or Files to Download (Mac OS) list and click Options.
For more information, see Chapter 4.
• From ColorWise Pro Tools
With ColorWise Pro Tools, you can set the default CMYK Simulation Profile,
CMYK Simulation Method, RGB Source Profile, RGB Separation, Output Profile,
Rendering Style, Spot Color Matching, Pure Black Text/Graphics, and Black
Overprint settings. For more information on using ColorWise Pro Tools, see
Chapter 3 of the Color Guide.
• From Hot Folders (C9800 GA models only)
You can assign a group of print options for a Hot Folder. When you specify print
options for a Hot Folder, the print options are assigned to all jobs sent through that
Hot Folder. These print options override any default options. For more
information, see Chapter 6.
• Overrides from the job management tools
To change job settings from Command WorkStation/Command WorkStation LE,
double-click a job to display the Job Properties dialog box. To change job settings
from Fiery Spooler, double-click a job to display the Override Print Settings dialog
box. For more information, see the Job Management Guide.
To Next Page
Loading...
Need help?
General
