8
8-3 Printing using an E-mail Client
5. You can enter additional text in the body of the message, if necessary. The text will
also be printed.
N
OTE: If your attachment exceeds the file size limitation set by your e-mail system
administrator, the e-mail will not be sent.
6. Send the e-mail.
The file is sent to the Fiery and the job is printed. After the Fiery receives the job, you
receive an e-mail notification that the print job was accepted. The e-mail also provides
a job identification (ID). You can use the job IDs to manage jobs with Job Control
(see the following section). The e-mail notification indicates any current error at the
printer.
Once the job has been printed, you receive a second e-mail notification that indicates
the job printed successfully.
You can use Job Control to check the status of your job and see if it printed
successfully.
To Next Page
Loading...
Need help?
General
