A
A-5 Print Options
CMYK Simulation Method
Printer’s default
/Quick/
Full (Source GCR) /Full (Output GCR)/
With CRD
Select Quick to use one-dimensional
transfer curves to adjust density output
of individual color channels.
Select Full (Source GCR) for a more
complete and accurate simulation by
applying colorimetric transformations
that adjust hue as well as output density.
This option produces output that
maintains the same amount of black as
the source document.
Select Full (Output GCR) to apply the
same simulation method as Full (Source
GCR), except that the output produced
contains a black amount determined by
the output profile.
The Printer’s default setting reflects the
setting specified in Fiery Setup.
For Windows, choose Expert Color as
the Color Mode to access this option.
For more information, see Chapter 1 of
the Color Guide.
CMYK Simulation Profile
Printer’s default
/SWOP-Coated/
DIC/Euroscale/Simulation-1/
Simulation-2/Simulation-3/
Simulation-4/Simulation-5/
Simulation-6/Simulation-7/
Simulation-8/Simulation-9/
Simulation-10/None/Match Copy
Specify the simulation goal to be used for
the current print job.
The Printer’s default setting reflects the
setting specified in Fiery Setup.
For Windows, choose Expert Color as
the Color Mode to access this option.
For more information, see Chapter 1 of
the Color Guide.
Color Mode
Printer’s default
/CMYK/Grayscale
(from Mac OS)
OR
Print Mode
Standard Color
/Expert Color/Grayscale
(from
Windows)
Specify the color mode for the current
print job.
Select CMYK, Standard Color, or Expert
Color for a full-color document.
Select Grayscale for a grayscale or
black-and-white document.
The Printer’s default setting reflects the
setting specified in Fiery Setup.
The options differ depending on which
driver you use.
For Windows, you must choose Expert
Color to set other color print options,
including Pure Black Text/Graphics.
Option and settings
(default setting is underlined)
Description
Requirements, constraints,
and information
To Next Page
Loading...
Need help?
General
