A
A-7 Print Options
Image Mode
Standard
/Best
Specify the image quality for your job.
Image Smoothing
Printer’s default
/Automatic/Off/On/
Below 90 ppi/Below 150 ppi/
Below 200 ppi/Below 300 ppi
Select On to minimize grainy output
when printing low-resolution images.
When you select On, image smoothing
will be enforced on all images.
Select Automatic if you want to use
smoothing only when it makes a visible
difference. When the image is below 150
ppi, image smoothing will be applied
automatically.
Select Below 90 ppi, Below 150 ppi,
Below 200 ppi, or Below 300 ppi to apply
image smoothing to those images whose
effective resolution is below the specified
ppi value that you choose.
The Printer’s default setting reflects the
setting specified in Fiery Setup.
If you create an EPS file in Photoshop,
the settings specified from Photoshop
take effect.
Instructions
Enter instructions for the operator about
the job.
Job PIN
Enter the PIN for a secure print job (if
you have set Destination to Secure Print).
Media Type
Plain Paper
/Transparency/Labels/
Recycled/Rough/Glossy/Bond/
Cardstock/Letterhead
Specify the media type to use for the
entire job.
Select Transparency if you will be
printing on transparencies. The
Transparency setting is only supported
with the Manual Feed tray.
Media Weight
Printer Setting
/Light/
Medium Light/Medium/Medium Heavy
Heavy/Ultra Heavy 1/Ultra Heavy 2/
Ultra Heavy 3
Specify the weight of the media for the
job.
Mixed Media
No
/ (define mixed media)
Click Define to specify media types for
specific pages.
For more information, see page A-14.
Notes 1
Enter information about the job. The Notes 1 field has a 32-character
limit.
Option and settings
(default setting is underlined)
Description
Requirements, constraints,
and information
To Next Page
Loading...
Need help?
General
