Engine Control Board Failure
Error Codes that Apply
102 to 106 and 200 to 202
Initial Troubleshooting Actions to Take
1. Cycle the Printers Power
2. If the problem persists follow the procedure below.
Parts of the Printer that Apply
1. Engine Control Board EEPROM
2. Engine Control Board
Troubleshooting Procedure
Steps Action Taken Yes No
1
Cycle power to the printer.
Does the error still appear?
Go to Step 2.
Complete
2
Perform a Factory Default Reset
Does the error still appear?
Go to Step 3.
Complete
3
Replace the EEPROM
Complete
Replace the Engine
Board.
To Next Page
Loading...
Need help?
General
