Oki C9800 Series User Manual

Finisher Interface Error
Error Codes that Apply
096
1. Cycle the printer's power.
2. If the problem persists follow the procedure below.
1. Finisher Control Board
2. Finisher Interface Cable
3. Finisher Power cord
4. Engine Control Board
Steps Action Taken Yes No
1
Check the following for evidence of
fault or damage:
Finisher Interface Cable/Power Cord
Finisher connections Is there any
damage?
Check the following for
evidence of fault or
damage:
Finisher Interface Cable
Finisher connections
Is there any damage?
Go to Step 2.
2
Check all the pins of the Finisher
Interface Cable for continuity.
Is the cable conductive?
Go to Step 3.
Replace the cable.
3
Replace the Finisher Control Board.
Does the error persist?
Replace the Engine
Control Board
Complete
Initial Troubleshooting Actions to Take
Parts of the Printer that Apply
Troubleshooting Procedure

Oki C9800 Series Specifications

General

Brand	Oki
Model	C9800 Series
Category	Printer
Language	English