Fuser Life Error
Error Codes that Apply
354
1. Replace the Fuser.
2. Cycle the printer's power.
3. If the problem persists follow the procedure below.
1. Fuser Unit,
2. Engine Control Board
Steps Action Taken Yes No
1
Generate a Configuration Page and
check the indicated Fuser Life counter
under “Supply Life”.
Does the counter indicate end of life?
Replace the Fuser.
Replace the Engine
Control Board.
Initial Troubleshooting Actions to Take
Parts of the Printer that Apply
Troubleshooting Procedure
To Next Page
Loading...
Need help?
General
