1.4 Cleaning the LED Heads
Clean the LED Head if a vertical White band or White stripe appears on the print.
Caution
Always use a soft, dry, lint-free cloth to clean the LED Heads. Never use solvents to clean the lens.
1. Open the Top Cover.
2. Clean each LED Head with a clean, lint- free cloth.
1.5 Cleaning the Feed Rollers
Clean the accumulated dust from the Feed Rollers.
Caution
Use care not to scratch or otherwise abrade the roller surface while cleaning. Gently rub the
roller surface using a soft, lint-free cloth moistened with water.
1. Access the rollers by removing Tray 1 or opening the MPT tray.
2. Clean each roller with soft, lint-free cloth moistened with water.
Tray 1 Rollers
MPT Tray Rollers
To Next Page
Loading...
Need help?
General
