Oki C9800 Series User Manual

Self Diagnostic Error Codes (Printer)
Code Cause/Description Remedy
052
Image Processor Driver Error Replace CU PCB (must replace EEPROM)
060
Parallel Interface Driver Error Replace CU PCB (must replace EEPROM)
062
USB Drive Error Replace CU PCB (must replace EEPROM)
063
Network Communication Error
Check Connections
Replace Network PCB if applicable
Replace CU PCB (must replace EEPROM)
070
CANT_HAPPEN PS Firmware Abnormality Detection Replace CU PCB (must replace EEPROM)
072
Engine Board Communication Error
Error Between Fiery Control Board and Engine Board
Replace CU PCB (must replace EEPROM)
Replace PU PCB
073 to 075
Video Overrun Detected Check Connections
Replace CU PCB (must replace EEPROM)
081
Parameter Match Check Error If Condition Does Not Change
Replace CU PCB (must replace EEPROM)
096
Finisher Un-restorable Error. For sub codes see
Self Diagnostic Error Codes (Finisher) page 95
097
Inverter Power Supply Error See “Inverter Power Supply Failure” page 119
104
Error Detected in Engine EEPROM Test at Power On See “Engine Control Board Failure” page 102 & 124
105
Error Detected in Engine EEPROM Presence at
Power On
See “Engine Control Board Failure” page 102 & 124
106
Error Detected in Engine Control Logic See “Engine Control Board Failure” page 102 & 124

Oki C9800 Series Specifications

General

Brand	Oki
Model	C9800 Series
Category	Printer
Language	English