Changing settings from the operator panel
- 103 -
Configuration
Tray Count
Displays the total number of print pages for
each tray.
Tray 2/3/4 is displayed when an optional
expansion tray is mounted.
Paper Feed Roller Counter
Displays the number of sheets fed from each
tray.
Tray 2/3/4 is displayed when an optional
expansion tray is mounted.
A4/Letter Impressions Count Color Displays the number of color printing sheets
converted to A4/Letter paper.
Mono Displays the number of mono printing sheets
converted to A4/Letter paper.
Supplies Life Cyan Toner
Displays the remaining toner amount (%) of
each color.
*: The display may vary with the type of toner
cartridge installed.
Magenta Toner
Yellow Toner
Black Toner
Displays the remaining service life (%) of image
drum of each color.
Belt Displays the remaining service life (%) of the
Fuser Displays the remaining service life (%) of the
Network Network
Information
General
Information
Extended
Displays the enabled expanded network other
than the standard wired LAN1.
Enabling Default
Displays the enabled default gateway.
Displays the printer name.
Short Printer
Displays the short printer name.
NIC Program
Displays the network firmware version.
Web Remote
Displays the web page version.
Wired(LAN1)
Information
Wired(LAN1) Displays the state (enabled/disabled) of the
Displays the IP address of the wired network.
Displays the subnet mask.
Gateway
Displays the gateway address when [Enabling
Default Gateway] is set to [Wired(LAN1)].
MAC Address Displays the MAC address of the wired
IPv6 Address
Displays the IPv6 address (local).