Oki ES6450 - Regulatory Wireless LAN Statements

Appendix
- 384 -
Item
C650/ES6450
Print quality assurance conditions
・Operating range
Temperature: 10°C; Humidity: 20% - 80% RH
Temperature: 32°C; Humidity: 20% - 60% RH
Humidity: 30% RH; Temperature: 10°C - 32°C
Humidity: 80% RH; Temperature: 10°C - 27°C
・Full color printing quality assurance range
Temperature: 17°C - 27°C; Humidity: 50% - 70% RH
Consumables
Toner cartridge, image drum
Maintenance parts
Belt unit, fuser unit
*1:Standard-sized paper
Specifications of the expansion tray unit
Item
Expansion tray unit
Weight
Approx. 6.0 kg
Dimensions
395 mm (W) x 450 mm (D) x 139 mm (H)
Network specifications
Item C650/ES6450
Interface
Ethernet 10BASE-T/100BASE-TX/1000BASE-T, IEEE 802.11a/b/g/n Wireless LAN
Protocol TCP/IPv4, TCP/IPv6, NetBIOS over TCP, LPR, Port9100, IPP, FTP, HTTP,
TELNET, SMTP, POP3, SNMPv1/v3, DHCP, DHCPv6, DNS, DDNS, WINS,
Bonjour, SNTP, LLTD, Web Services for Devices (WSD), SSL/TLS, IPSec, LDAPv3,
Kerberos, IEEE802.1X, AirPrint, HTTPS, SMTPS, POP3S, IPPS, FTPS, LDAPS
Wireless LAN specifications
Item
C650/ES6450
Wireless LAN standard
IEEE802.11a/b/g/n compliant (2.4 GHz/5 GHz)
Security
Disabled, WEP, WPA-PSK, WPA2-PSK, WPA-EAP, and WPA2-EAP
Regulatory wireless LAN statements
 FCC Statement
 IC Statement
 Europe-CE Declaration of conformity.
FCC statement
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.