Connecting to the PC after preparing this machine
- 64 -
12
Make sure that this machine is added to the list of [Printers] and that "OKI C650 PS" is displayed
in [Type].
If "OKI C650 PS" is not displayed in [Type] properly, click [-] to delete this machine from [Print], and then repeat
Steps 8 - 12.
13
Click [Open the Print Queue].
14
Select [Print Test Page] from the [Print] menu.
Installation is completed when the test page is printed.
If you install options like the expansion tray unit, change the settings of printer driver.
Setting the printer driver(P.64)
Setting the printer driver
If an expansion tray unit has been installed, change the printer driver settings with the following procedure after
installing the printer driver.
Installing software on a PC(P.59)
To perform this procedure, you will have to login to the PC as a user with administrator privileges.
For Windows PCL printer driver
1
Open the "Devices and Printers".
How to open the printer folder(P.142)
2
Right-click on the icon of [OKI C650 PCL], and select [Printer Properties].
3
Select the [Device Options] tab.
To Next Page
Loading...
