Oki ES6450 - Parts Identification of the Operator Panel

Changing settings from the operator panel
- 91 -
Parts identification of the operator panel
No.
Name
Function
1 Display Displays the state of this machine and operation instructions.
There are two types of standby screens: "Show Remaining Toner" and
"Show Tray Information".
The factory default setting is "Show Remaining Toner".
2 «ON LINE» button Switches between online and offline.
Lights green when online, and goes off when offline.
3 «CANCEL» button Cancels the current printing. Goes back to the standby screen when the
menu is displayed.
4
«OK» button
Confirms the highlighted item.
5 Scrolls buttons ▲▼ Used to select a menu or scroll the screen display. It can be used to
input numbers in the numerical input screen.
6
«BACK» button
Goes back to the previous screen.
7 «HELP» button
Displays the help screen. To close the screen, press the «HELP» button
again, or press the «BACK» or «CANCEL» button.
8 «POWER SAVE» button Turns on or off the power save mode.
Cancels the sleep mode.
Lights green in the power save mode, and flashes green in the sleep
mode.
9
Numeric keypad
Inputs alphanumeric characters or symbols.
10 «Fn» key Used to display the short cut menu.
Fn: The abbreviation for "Function".
11 «CLEAR» key
Long or short press the key to perform the following actions according to
the item to input.
 Minimizes the settings.
 Inputs 0 for the settings.
 Deletes one character of the input text.
 Deletes the selected item.
* Disabled when the IP address is input.
12 ATTENTION lamp Indicates the state of this machine.
Lights off in the normal state.
On: Indicates that a minor error has occurred.
Blinking: Indicates that a major error has occurred.
13 NFC mark When using the NFC function, bring your mobile device close here. For
details about the NFC function, see "Printing from a mobile
device(P.287)".
14 Power switch Turns on/off the power of this machine. Lights blue when the power is
turned on, and lights off when the power is turned off.