Maintenance
- 313 -
5
Gently wipe the lens surface of the LED head (x 4) with a soft tissue paper.
Do not expose the image drum to direct sunlight or strong light (About 1,500 lux or above). Do not leave it
uncovered for more than 5 minutes even under room lighting.
6
Close the output tray, and push both sides down from top.
7
Press the L1 lever all the way in.
8
Close the front cover firmly with both hands.
Cleaning the surface of the main unit
ï‚Ÿ Do not use benzene, paint thinner or alcohol as it may damage plastic parts and coating of this machine.
ï‚Ÿ It is not necessary to lubricate the parts of this machine. Do not lubricate.
1
Power off this machine.
To Next Page
Loading...
Need help?
General
