Oki ES6450 - Changing Settings of Monitoring Tool

Useful software
- 252 -
5 When [Completed] is displayed and "Success" is displayed in the [Status] field, the firmware
update is completed.
If failed, an error message will be displayed in the [Status] field. Click [Details] on the right side of the message to
display the error correction method.
6 Select [Quit] from the [File] menu.
Changing settings of Monitoring Tool
1 Select [Start] - [Okidata] or [OKI] - [Monitoring Tool] to start the Monitoring Tool.
2 Select [Environmental settings] from the [Settings] menu.
3 Set the values in each tab, and click [Apply].
 [Printer Communication] tab
Item Description
Printer Search Timeout
Sets the time for searching for the printer.
Printer Communication Timeout
Sets the time limit for the timeout error of connection to the printer.
Network Search Range
Specifies the range for searching for the printer.
SNMP Community Name
Sets the SNMP community name.
Restore default
Returns all settings to default values.