Connecting to the PC after preparing this machine
- 29 -
3
Then, mount the anti-tip feet b (x 3) to both sides and the back.
4
Check that the anti-tip foot a and the anti-tip feet b (x 3) are inserted in place by turning the
dedicated caster stand upside down.
5
Turn the dedicated caster stand back and mount the positioning pins (x 2). Rotate to fix the
positioning pins (x 2) with a flat-head screwdriver.
6
Turn off this machine and remove the power cord and all the cables.
Installation with a cable connected may cause you to get caught in the cable and get injured.
7
Lock the casters (x 2) to prevent the dedicated caster from moving during the installation of the
main unit and the expansion tray.
To Next Page
Loading...
