Oki ES6450 - Page 54

Connecting to the PC after preparing this machine
- 54 -
5 Check that [General Setup] is selected, and press «OK».
6 Check that [Extended Network] is selected, and press «OK».
7 Press ▼ to select [Wireless], and press «OK».
8 When [Are You Sure?] is displayed, check that [Yes] is selected, and press «OK».
9 Wait until the standby screen appears as this machine restarts.
2. Enabling the AP mode
1 Press the scroll button ▼ on the operator panel several times to select [Wireless(AP Mode)
Setting], and press «OK».
2 Input the admin password using the numeric keypad, and press «OK».
Admin password(P.196)
3 Check that [Wireless(AP Mode)] is selected, and press «OK».
"Cannot be used simultaneously with wireless(infrastructure)." will be displayed for about 5 seconds.