Oki mc series User Manual

Appendix A - menu system > 135
Fax Setup
a
(cont.)
Fax Setting Service Bit ON, OFF
Country Code International Select the country in
which the MFP is
situated.
A/R Full Print ON
Tone For Echo (For
Transmission)
Enable, Disable It only shows, when
ServiceBit = ON.
Tone For Echo (For Reception) Enable, Disable It only shows, when
ServiceBit = ON.
H/Modem Rate (For Tx)
33.6 Kbps ,
28.8 Kbps, 14.4 Kbps,
9.6 Kbps, 4.8 Kbps
Specify modem rate.
Note: If you are using
an IP phone line and
fax Tx/Rx fails, change
the modem rate to
14.4kbps or less.
H/Modem Rate (For Rx)
33.6 Kbps ,
28.8 Kbps, 14.4 Kbps,
9.6 Kbps, 4.8 Kbps
Attenuator 0~15 dB It only shows, when
ServiceBit = ON.
(The default value is
different for each
country.)
MF Attenuator
0~15 dB It only shows, when
ServiceBit = ON.
(The default value is
different for each
country.)
Pulse Make Ratio
33%, 39%, 40% Sets the make rate of
DP (10 pps) during call.
It only shows, when
ServiceBit = ON and
Tone/Pulse setting =
PULSE.
(The default value is
different for each
country.)
Pulse Dial Type
N, 10-N, N+1 It only shows, when
ServiceBit = ON.
(The default value is
different for each
country.)
MF(Tone) Duration
75, 85, 100 mseconds It only shows, when
ServiceBit = ON and
Tone/Pulse setting =
TONE.
(The default value is
different for each
country.)
ITEM OPTION VALUE/DESCRIPTION

Oki mc series Specifications

General

Brand	Oki
Model	mc series
Category	All in One Printer
Language	English