Oki mc series User Manual

Appendix A - menu system > 136
Fax Setup
a
(cont.)
Fax Setting
(cont.)
Calling Timer
1~255 second(s) Sets the call connection
wait time (TO timer).
When the setting value
is “0”, the MFP runs at
the initial value of each
country. When any
value other than “0” is
set, the call connection
wait time (TO timer)
can be selected in the
range of 1 to 255 mm.
It only shows, when
ServiceBit = ON.
(The default value is
different for each
country.)
PBX Line ON, OFF
Forwarding Setting ON, OFF
TAD Mode
Type 1, Type 2, Type 3 Specify TAD mode type.
Tel Priority Mode ON, OFF
CNG Detection ON, OFF
T/F Timer Programming 20 seconds,
35 seconds
Soft Ringer Volume OFF, Low, Middle,
High
Select volume level.
Remote Receive Number OFF, 000, 111, 222,
333, 444, 555, 666,
777, 888, 999
The left digits can be
set.
Internet
Fax Setup
Default
Settings
Scan Size A4, Letter, Legal 13,
Legal 13.5, Legal 14
Allows you to select the
paper size to match the
document size.
Density -3 ~ 0 ~ +3 Adjust density
Darker: Keep color
intensity and darker
image.
Lighter: Reduce color
intensity and gives
lighter image.
Resolution Normal, Fine,
Extra-Fine, Photo
Allows you to specify
the type of images on
the document.
Background Removal OFF, 1, 2, 3, 4, 5, 6
Allows you to block out
the color background of
the image (assuming
document has a color
background) - such
that the background
color is not printed.
Continuous Scan ON, OFF Allows you to continue
scanning more
documents. Allows you to
construct a single fax job
from multiple individual
sheets or originals.
Compression Rate High, Medium, Low Select the appropriate
compression level.
ITEM OPTION VALUE/DESCRIPTION

Oki mc series Specifications

General

Brand	Oki
Model	mc series
Category	All in One Printer
Language	English