Microline 8810 User’s Guide
100
Print Media Specifications (cont.)
Individual Multi-Part Forms
Note Recycled paper can be printed, but please note the following:
• Recycled paper tends to leave behind more paper dust, requiring
more frequent cleaning of the printer.
• Recycled paper is easily affected by humidity and should not be
used in humid environments.
Width
Minimum
• 2.17 inches (55 mm)
• 3.94 inches (100 mm) Auto Align Mode
Maximum
• 16.54 inches (420 mm)
• 14.33 inches (364 mm) Auto Align Mode
Length
Minimum
•2.8 inches (70 mm)
Maximum
• 16.54 inches (420 mm)
Thickness
Normal Mode
• Up to 6 parts (original + 5)
• Up to 0.014-inch (0.36 mm) thick
High Impact Mode
• Up to 8 parts (original + 7)
• Up to 0.019-inch (0.48 mm) thick
To Next Page
Loading...
