Microline 8810 User’s Guide
84
Paper Jams, Continuous Forms
If a paper jam is indicated on the display panel, use the following method to
clear it.
Caution! Do not open the access cover with the power on, as
injury may result.
Caution! The printhead may be very hot after printing. Allow
the printhead to cool before touching it.
1. Turn OFF the power switch.
2. Tear off the continuous form from the paper stack.
3. Turn the platen knob to bring out the continuous forms.
F7_10_a.jpg
F7_10_b.jpg
To Next Page
Loading...
