Oki MICROLINE 8810 User Manual

Microline 8810 User’s Guide
75
Form Tear Off
The Form Tear Off feature allows you to advance continuous forms to the
stacker for tear off.
The printer default for Forms Tear Off is Off. To use this feature, you must
enter the Function Settings Menu and turn it on.
Turn On Forms Tear Off
1. Press SEL.
The printer goes off-line.
2. Simultaneously press SHIFT and MODE to enter the Function Settings
Menu.
PRINTER CONTROL displays.
3. Press and hold SHIFT, then press FF repeatedly until FRONT FEED
displays.
4. Press FF repeatedly until
FORM TEAR-OFF displays.
5. Press MODE repeatedly until the interval you want to select (2 seconds,
1 second, or 500 milliseconds) displays.
6. Press LOAD: this saves your setting and exits the menu mode.
Move Continuous Forms Up for Tear Off
Press the SHIFT/TEAR switch to move continuous forms to the tear off
position.
8810_3_crop.jpg

Oki MICROLINE 8810 Specifications

General

Color	No
Built-in barcodes	EAN13, PostNet, UPC-A, UPC-E
Maximum number of copies	8 copies
Fonts included	5
Media thickness	0.48 mm
Dimensions (WxDxH)	598 x 397 x 235 mm
Power requirements	120V-240V (±10%, 50Hz/60Hz)
Connectivity technology	Wired
Compatible operating systems	Windows Vista 32/64, XP, 2000, 98, NT 4.0, 2003 Server
Print direction	Bi-directional
Maximum duty cycle	24000 pages per month
Mean time between failures (MTBF)	10000 h
Sound pressure level (printing)	55.5 dB
Power consumption (standby)	25 W
Power consumption (typical)	120 W
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	5 - 40 °C
Operating relative humidity (H-H)	30 - 85 %