To Next Page

To Previous Page

Microline 8810 User’s Guide

Error Messages

Manual paper End

Insert Paper

Load paper on the platform and press SEL.

Paper end alignx

insert paper

Load paper on the platform and press SEL.

Front Paper End

Insert Paper

Load continuous forms paper on the front tractors.

Rear Paper End

Insert Paper

Only appears when the optional Rear Push Tractor is installed. Load

continuous forms paper on the rear tractor.

CSFF Paper End

Set Paper to CSF

Applies only when the optional CSF is installed. Load paper in the CSF.

CSFR Paper End

Set Paper to CSF

Applies only when the optional CSF is installed. Load paper in the CSF.

Paper Jam

Remove paper

Remove the jammed paper and press SEL. See page 82.

Data Present

Insert Paper

The printer has received data, but there is no print media loaded in the

selected path. Load print media.

Data Present

Press SEL SW

The printer has received data and paper is loaded, but the printer is off line.

Press the SEL switch to place the printer on line.

Other manuals for Oki MICROLINE 8810

Questions and Answers:

Need help?

Do you have a question about the Oki MICROLINE 8810 and is the answer not in the manual?

General

Color	No
Built-in barcodes	EAN13, PostNet, UPC-A, UPC-E
Maximum number of copies	8 copies
Fonts included	5
Media thickness	0.48 mm
Dimensions (WxDxH)	598 x 397 x 235 mm
Power requirements	120V-240V (±10%, 50Hz/60Hz)
Connectivity technology	Wired
Compatible operating systems	Windows Vista 32/64, XP, 2000, 98, NT 4.0, 2003 Server
Print direction	Bi-directional
Maximum duty cycle	24000 pages per month
Mean time between failures (MTBF)	10000 h
Sound pressure level (printing)	55.5 dB
Power consumption (standby)	25 W
Power consumption (typical)	120 W
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	5 - 40 °C
Operating relative humidity (H-H)	30 - 85 %