Oki MICROLINE 8810 User Manual

Microline 8810 User’s Guide
16
Print Modes
Your printer has two print modes:
• Normal: corresponds to the printer settings. The factory default is
utility, high speed draft.
• Quiet: reduces noise by printing at one-half the speed.
Change Print Mode
Change to Quiet
Note If you change the print mode while printing, the printer immediately
switches to the new print mode.
1. Make sure the printer is turned on and that the SEL light is on.
2. Press FF. FF.jpg
The QUIET light goes on.
Change to Normal
Note If you change the print mode while printing, the printer immediately
switches to the new print mode.
1. Make sure the printer is turned on and that the SEL light is on.
2. Press LF. LF.jpg
3. The QUIET light goes out.
8810_3_crop.jpg

Oki MICROLINE 8810 Specifications

General

Color	No
Built-in barcodes	EAN13, PostNet, UPC-A, UPC-E
Maximum number of copies	8 copies
Fonts included	5
Media thickness	0.48 mm
Dimensions (WxDxH)	598 x 397 x 235 mm
Power requirements	120V-240V (±10%, 50Hz/60Hz)
Connectivity technology	Wired
Compatible operating systems	Windows Vista 32/64, XP, 2000, 98, NT 4.0, 2003 Server
Print direction	Bi-directional
Maximum duty cycle	24000 pages per month
Mean time between failures (MTBF)	10000 h
Sound pressure level (printing)	55.5 dB
Power consumption (standby)	25 W
Power consumption (typical)	120 W
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	5 - 40 °C
Operating relative humidity (H-H)	30 - 85 %