Oki MICROLINE 8810 User Manual

Microline 8810 User’s Guide
96
Clean the Housing
You should clean the inside of the printer every six months (or after about
300 hours of operation).
Note If you are consistently using recycled paper, you need to clean the
housing more often because recycled paper generates more paper
dust.
Caution!
Never use solvents or strong detergents on the cabinet:
they could damage the housing.
1. Turn the printer off and remove any paper that is loaded.
2. Open the platform and use a clean, dry cloth to clean away any bits of
paper and paper dust.
3. Close the platform.
4. Open the cover.
5. Tilt the display panel forward and remove the ribbon cartridge.
6. Use a clean, dry cloth to clean any bits of paper or paper dust from
around the platen.
7. Replace the ribbon cartridge. See page 91. Tilt the display panel back
into place.
8. Close the cover.
F5-03b.JPG
F2_18a.JPG

Oki MICROLINE 8810 Specifications

General

Color	No
Built-in barcodes	EAN13, PostNet, UPC-A, UPC-E
Maximum number of copies	8 copies
Fonts included	5
Media thickness	0.48 mm
Dimensions (WxDxH)	598 x 397 x 235 mm
Power requirements	120V-240V (±10%, 50Hz/60Hz)
Connectivity technology	Wired
Compatible operating systems	Windows Vista 32/64, XP, 2000, 98, NT 4.0, 2003 Server
Print direction	Bi-directional
Maximum duty cycle	24000 pages per month
Mean time between failures (MTBF)	10000 h
Sound pressure level (printing)	55.5 dB
Power consumption (standby)	25 W
Power consumption (typical)	120 W
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	5 - 40 °C
Operating relative humidity (H-H)	30 - 85 %