Oki MICROLINE 8810 User Manual

Microline 8810 User’s Guide
15
Quick Reference: Control Panel Functions
Note Unless otherwise specified, these instructions assume that the
printer is selected (on line).
Enter the Menu
1. Press SEL.
2. Press both the MODE and the
SHIFT switches simultaneously.
Print the Menu
1. With the printer in the Manual
Mode, turn it off.
2. Press and hold SELECT and
MODE while turning the printer
on.
3. When prompted, load a sheet
of paper (minimum letter or
A4) on the platform.
Change Print Modes
With the printer on line:
1. Press FF to engage the Quiet
print mode.
2. Press LF to engage the Normal
print mode.
Change the Printhead Gap
1. Press SEL.
2. Press and hold the SHIFT
switch, then press the LOAD
switch repeatedly to scroll
through the various settings for
the printhead gap.
3. Press SEL
Change Paper Paths
1. Press SEL.
2. Press MODE repeatedly to
change the paper path.
The printer automatically
reinitializes in the new path.
Move Continuous Forms to
the Print Position
1. Press SEL.
2. Press FF.
Park Continuous Forms
1. Press SEL.
2. Press LOAD.
Move Continuous Forms to
the Tear Off Position
Note Form Tear Off must be
activated. See page 75.
1. Press SHIFT to move
continuous forms up to the tear
off position.
Change Align x Setting
1. Press SEL.
2. Press and hold the MODE
switch, then press the SHIFT
switch repeatedly to select
Align 1, Align 2, Align 3, or
Align 4

Oki MICROLINE 8810 Specifications

General

Color	No
Built-in barcodes	EAN13, PostNet, UPC-A, UPC-E
Maximum number of copies	8 copies
Fonts included	5
Media thickness	0.48 mm
Dimensions (WxDxH)	598 x 397 x 235 mm
Power requirements	120V-240V (±10%, 50Hz/60Hz)
Connectivity technology	Wired
Compatible operating systems	Windows Vista 32/64, XP, 2000, 98, NT 4.0, 2003 Server
Print direction	Bi-directional
Maximum duty cycle	24000 pages per month
Mean time between failures (MTBF)	10000 h
Sound pressure level (printing)	55.5 dB
Power consumption (standby)	25 W
Power consumption (typical)	120 W
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	5 - 40 °C
Operating relative humidity (H-H)	30 - 85 %