Microline 8810 User’s Guide
31
Print the Menu on Single Sheets
1. Turn the printer off.
2. Press and hold SELECT and MODE while turning the printer on.
3. When "RELEASE SW" displays, release the switches.
4. Load the paper on the platform.
5. The menu prints.
Continuous Forms (Front Feed)
Before Starting
1. Make sure continuous forms are loaded.
2. Make sure front feed is selected. If manual feed is selected, the second
line of the display reads ALIGN1 (the default, or whatever alignment
method you have selected).
F5-11a.JPG
F7_10_e.JPG
To Next Page
Loading...
