Oki MICROLINE 8810 - Page 39

Microline 8810 User’s Guide
39
MemoryAutoAlign Valid , Invalid
Align1 Pos.Adj.
(Align 1 must be
selected)
0 mm,
5.1 mm , 45.4 mm
Adjusts in 1/90 inch (0.28 mm) increments from initial
setting
Align2 Pos.Adj.
(Align 2 must be
selected)
0 mm,
5.1 mm , 45.4 mm
Adjusts in 1/90 inch (0.28 mm) increments from initial
setting
Align3 Pos.Adj.
(Align 3 must be
selected)
0 mm,
5.1 mm , 45.4 mm
Adjusts in 1/90 inch (0.28 mm) increments from initial
setting
Align4 Pos.Adj.
(Align 4 must be
selected)
0 mm,
5.1 mm , 45.4 mm
Adjusts in 1/90 inch (0.28 mm) increments from initial
setting
AutoAlignDetect Valid Level 1,
Valid Level 2 , Invalid
Skew Detect Valid Level 1,
Valid Level 2 , Invalid
Check Print Area
Valid , Invalid
Item Settings