Oki MICROLINE 8810 User Manual

Microline 8810 User’s Guide
64
Sets the protocol used: Ready/Busy [the default] or
X-ON/X-OFF.
Rcv. Buffer
Sets the amount of memory ( 0 or 128 Kbytes) devoted to
holding received data. The default is 128 Kbytes. Changing this
to 0 will tie up your computer while printing, but if you abort the
print job, the printer will stop much sooner.
Rear Load Adj.
Applies only when the optional Rear Push Tractor is installed.
For fine tuning the Top of Form (TOF) location when using
continuous forms with the rear push tractor. Settable from -40 to
+40 in increments of 1/144 inch. The default is 0.
Negative values decrease the space down from the top of the
form:
•TOF moves up.
•paper moves down.
Positive numbers increase the space down from the top of the
form:
•TOF moves down.
•paper moves up.
Regist. Low
Regist. Normal
Regist. High 1
Regist. High 2
For print registration adjustment These are set at the factory.
Remove Sheet Wait
Applies only when the optional CSF is installed on the rear of the
printer.
Change the setting to Alarm if you want the printer to sound an
alarm when a printed sheet has exited the the rear CSF and is
sitting on the platform.

Oki MICROLINE 8810 Specifications

General

Color	No
Built-in barcodes	EAN13, PostNet, UPC-A, UPC-E
Maximum number of copies	8 copies
Fonts included	5
Media thickness	0.48 mm
Dimensions (WxDxH)	598 x 397 x 235 mm
Power requirements	120V-240V (±10%, 50Hz/60Hz)
Connectivity technology	Wired
Compatible operating systems	Windows Vista 32/64, XP, 2000, 98, NT 4.0, 2003 Server
Print direction	Bi-directional
Maximum duty cycle	24000 pages per month
Mean time between failures (MTBF)	10000 h
Sound pressure level (printing)	55.5 dB
Power consumption (standby)	25 W
Power consumption (typical)	120 W
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	5 - 40 °C
Operating relative humidity (H-H)	30 - 85 %