Oki Microline ML380 User Manual

5.Swing the paper guide wire on the tractor unit to the back. Rest the wire on the paper separator
while lowering the tractor until the tractor pins engage the notches at either end behind the platen.
6.Swivel the tractor unit forward until the clips at either end clamp onto the platen shaft.
7. Install the pull tractor access cover by sliding the grooves at either end over the pins on the
printer housing.
ML 380 ( 96-02-03 )

Oki Microline ML380 Specifications

General

Brand	Oki
Model	Microline ML380
Category	Printer
Language	English