Oki MPS5502 - Page 149

45641001TH Rev.1
5-66 /
Oki Data CONFIDENTIAL
[F700] Overwrite error
Classification Error item
Other service call Overwriting fails.
Check item Measures
Setting • Ifaservicecalloccursagainafterthereboot,replacetheHDD.
[F800] Date error
Classification Error item
Other service call Theyear2038problem
Check item Measures
Setting Resetthedate,andrequesttheadministratortosetthedateandtime.
1.Turnthepoweronwhilepressingthe[6]and[CLEAR]button.
2.Select[2]key,andthenpressthe[START]button.
3. Press the [START] button on the confirmation screen displayed. (The
dateissettoJanuary1st,2011.)
4.Requesttheadministratortosetthedateandtime.
[F900] Model information error
Classification Error item
Other service call Machine information alignment error. The machine information is
damaged.
Check item Measures
Setting Recover the machine information by means of the following procedure.
<Machine information recovery>
1.TurnthepowerONwhilepressing[6]andthe[CLEAR]button
simultaneously.
2.Keyin[3]toselect“3.SRAMRe-InitializeSupport”,andthenpress
the [START] button.
3.Selectthepropermachineinformationwith1or2key,andthenpress
the [START] button.
4.Shutdowntheequipmentbypressingthe[ON/OFF]button.
5. Turn the power ON by pressing the [ON/OFF] button.
* Ifitisnotrecovered,initializetheSRAMbyperformingthefollowing
procedure.

P.6-22“6.2.5PrecautionsandprocedurewhenreplacingtheSRAM
board (for the SYS board)”