Oki MPS5502 - Page 290

45641001TH Rev.1
9-9 /
Oki Data CONFIDENTIAL
[F] Reset “FUNCTION LIST FOR MAINTENANCE”
(1) Printoutthe“FUNCTIONLISTFORMAINTENANCE”listaftertheformatting.
(2) Whilepressing[1]and[3]simultaneously,turnthepowerON.(FunctionMode)
(3) Compare the lists which were printed before and after the formatting to check the
setting items having the different setting values. Set the value which was set before the
formatting
Turn the power OFF.
(4) Turn the power OFF.
[G] Reset “FUNCTION” list
Resetthefaxfunctionbyreferringtothe“functionlist”thatwasprintedoutin

P.9-8“[C]
Printout“FUNCTION”list”.
(1) Press the [USER FUNCTIONS] button.
(2) Pressthe[ADMIN]button,enterthepassword,andthenpressthe[ENTER]button.
(3) Pressthe[FAX]buttonandthenthe[TERMINALID]buttontoseteachitem.
(4) Pressthe[INITIALSETUP]buttontoseteachitem.
Notes:
Explain to the user (machine administrator) about the next operation and ask him/her to
enter his/her password.
[H] Check actuation of data encryption function setting
Check if the data encryption function is in operation.
Press the [COUNTER] button on the control panel. If a key-shaped icon is displayed at the
toprightofthescreen,thedataencryptionfunctionisinoperation.
Fig.12-2