Oki MPS5502 - Page 318

45641001TH Rev.1
11-20 /
Oki Data CONFIDENTIAL
05/
08
Mode Element
Sub
element
Item Subitem Code
Sub-
code
Details
Default
value
Acceptable
value
RAM Contents
Proce-
dure
08 Setting
Mode
System User
interface
Card reading
device
3502 Card reader format
information -2
0 0-
42949
67295
SYS The data of the block number in the noncontact IC is set.
KP-2003:<PPQRSSTU(hexadecimal number)>
PP: 1st block
Q: 1st block beginning byte
R: 1st block ending byte
SS: 2nd block
T: 2nd block beginning byte
U: 2nd block ending byte
KP-2005:<RRBSEbse(hexadecimal number)>
RR: 00 (Fixed)
B: 1st area block number
S: 1st area beginning byte offset
E: 1st area ending byte offset
b: 2nd area block number
s: 2nd area beginning byte offset
e: 2nd area ending byte offset
*Ifthe2ndblock/areaisnotused,settheSSTU to “FFFF”
(hexadecimalnumber),thebse
to”FFF” (hexadecimal
number).
5
08 Setting
Mode
System User
interface
Card reading
device
3503 Card reader format
information -3
0 Refer to
contents
SYS Securitykey“KKKKKKKKKKKK”(12 digits)
<hexadecimalnumber>inthe[KeyInformation]of the
[SectorNumber]setinthecode08-3501should be entered.
<Acceptable value>
0-0xFFFFFFFFFFFFFFFF
5
08 Setting
Mode
System User
interface
Card reading
device
3504 Card authentication
LDAP server
0 0-100 SYS
LDAPservernumberforthecardauthentication when a
noncontact IC card is used should be set.
1
08 Setting
mode
System General
ListprintUSB
storage setting
3615 ListprintUSB
storage setting
0 0-1 SYS 0: Enable (USB storage available)
1: Disable (USB storage not available)
1
08 Setting
mode
System General
Real time log
notification
function
3623 Job filtering setting 0 0-65535 SYS Changesthetargettypeofjobsfornoticationin real
time log notification function.
1
08 Setting
mode
System General
Real time log
notification
function
3624 Logitem filtering
setting
21474
83921
0-
42949
67295
SYS Changes the target type of logs for notification in real
time log notification function.
5
08 Setting
Mode
System General Real time log
notification function
3626 Department
information
transmission
setting
0 0-1 SYS Setswhetherthedepartmentinformation(number,name,
code) is transmitted or not in the real time log notification
function.
0:Departmentnumber,departmentname,department
code
1:Departmentnumber,departmentname
1
08 Setting
mode
System General 3629 Enable/Disable
setting of standard
EWBfunction
1 0-1 SYS 0: Disabled
1: Enabled
1