Oki MPS5502 - Page 337

45641001TH Rev.1
11-39 /
Oki Data CONFIDENTIAL
05/
08
Mode Element
Sub
element
Item Subitem Code
Sub-
code
Details
Default
value
Acceptable
value
RAM Contents
Proce-
dure
08 Setting
Mode
System Network Prioritized
authentication
server
8608 Windows 0 0-100 SYS Sets the prioritized authentication server to be searched (0
to 100). The servers displayed on the screen accessed by
WebPage->Administration->Maintenance->Directory
Service are numbered beginning at the top (0 to 100).
1
08 Setting
Mode
System Network Prioritized
authentication
server
8609 LDAP 0 0-100 SYS Sets the prioritized authentication server to be searched (0
to 100). The servers displayed on the screen accessed by
WebPage->Administration->Maintenance->Directory
Service are numbered beginning at the top (0 to 100).
1
08 Setting
Mode
System Network Prioritized
authentication
server
8610 Card 0 0-100 SYS Sets the prioritized authentication server to be searched (0
to 100). The servers displayed on the screen accessed by
WebPage->Administration->Maintenance->Directory
Service are numbered beginning at the top (0 to 100).
1
08 Setting
Mode
System User
interface
8622 Date and time
addition setting to
file name of scan
to file/e-mail
1 0-1 SYS 0: Not added
1: Added
1
08 Setting
Mode
System User
interface
8623 0 RIP function
setting
1 0-1 SYS Enables/Disables the function related to Excel boarder
renderingofPCL6.Thefunctionistopreventmissing
lines when scaling down and inconsistent line width when
scaling up.
0:Disabled(Nocorrection.CompliantwithPCL6language)
1: Enabled
4
08 Setting
Mode
System User
interface
8624 Switchover of
filename display
method
3 0-3 SYS Switches the display method of filename.
0: Displays the filename from the beginning
1: Displays the trailing characters
2: Displays the beginning and trailing characters
3: Displays the filename without abbreviation
1
08 Setting
mode
System User
interface
8628 Job operation
on the COPY
screen when the
coin controller is
connected
0 0-1 SYS This setting enables user to move from the COPY screen
toJOBSTATUSscreen,andthenoperatejobsduring
printing when the coin controller is connected. This code
isvalidwhenthevalueof08-9016is“1”.
0: Disabled
1: Enabled
1
08 Setting
Mode
System FAX 8631 Filename creation
at fax reception
and forwarding
0 0-1 SYS 0: Use address name (family-name/first-name) as
filename if multiple names are found by address book
search of TSI (sender information).
1: Use address name (family-name/first-name) as
filename only when single name is found by address
book search of TSI (sender information).
1
08 Setting
mode
System User
interface
8640 Job build operation
when the coin
controller is
connected
0 0-1 SYS Thissettingenablesusertousethejobbuildfunction
when the coin controller is connected. This code is valid
whenthevalueof08-9016is“1”.
0: Disabled
1: Enabled
1