55
Tip ► To delete all the data stored on LEO internal memory, flag All checkbox (1 in Figure 71) and Delete
checkbox (2 in Figure 71). Then press OK to confirm (3 in Figure 71).
Figure 71. How to Delete all data stored on LEO.
To delete all the readings of a single device follow the instructions below:
1. Press the View icon to open the View Data page (see Figure 70 a).
2. Press the device name (see Figure 72 a).
3. Press the icon (see Figure 72 b) in the page that opens. A pop-up dialog box appears.
4. Enable the Delete check box (1 in Figure 72 c) and then press OK to download the selected data to the
USB Key. (2 in Figure 72 c).
Figure 72. How to Delete Data for a single device (a – b - c).
To Next Page
Loading...
