MTS System for Stereo TV
You can use the "MTS" hotkey repeatedly on the remote control to select the
TV Audio System among Mono, Stereo, SAP for the analog TV program.
You can use this hotksy to select one Audio Language for the digital TV program.
Or
Audio System
Mono
Stereo
SAP
Description
Select for mono reception. (Use to reduce noise during weak stereo broadcasts)
Select for stereo reception when viewing a program broadcast in stereo mode.
Select to automatically switch the TV to Secondary Analog Program when a
signal is received. (If no SAP signal is present, the TV remains in stereo mode)
Adjusting On Screen Displays (OSD)
OSD-Remote Control
70
To Next Page
Loading...
