Field Service Ver. 2.0 Jul. 2009 10. UTILITY
275
ADJUSTMENT / SETTING
10.5 User Settings
10.5.1 System Settings-Language Selection
A. Use
• To select the language on the LCD display.
• To change the language used on the control panel.
B. Procedure
• The language options depend on the marketing area selected in [Marketing Area] avail-
able from [System 1] under Service Mode.
See P.523
10.5.2 System Settings-Measurement Unit Settings
A. Use
• To select the unit displayed on the LCD display.
B. Procedure
• The default setting varies depending on the marketing area.
mm (Numerical Value) inch (Numerical Value) inch (Fraction)
10.5.3 System Settings-Paper Tray Settings
A. Auto Tray Selection Settings
(1) Use
• To set the tray for automatic selection when APS is being set.
• To establish the priority for switching the Tray when ATS is being set.
(2) Procedure
• Select the tray on the [Auto Tray Select] screen.
• Set the priority on the [Tray Priority] screen.
B. Auto Tray Switch ON/OFF
(1) Use
• To set whether to automatically switch to another tray with same size paper when the
paper feed tray runs out of paper during printing.
(2) Procedure
• The default setting is Restrict.
Allow “Restrict”
C. No Matching Paper in Tray Setting
(1) Use
• To set whether to switch to another tray automatically when the specified tray r
uns out of
paper during printing.
Stop Printing (Tray Fixed) : It stops printing when the specified tray runs out of paper.
Switch Trays (Tray Priority): To switch to another tray with the specified paper and print
when the tray is out of paper
(2) Procedure
• The default setting is Stop Printing (Tray Fixed).
“Stop Printing (Tray Fixed)” Switch Trays (Tray Priority)
Y110571-1 Service Manual
To Next Page
Loading...
Need help?
General