Field Service Ver. 2.0 Jul. 2009 10. UTILITY
271
ADJUSTMENT / SETTING
E. FTP
(1) Use
• To register/change FTP address to send scanned data.
(2) Procedure
• A new address can be registered by touching [New].
• Select any displayed address to check, edit or delete the setting.
F. WebDAV
(1) Use
• To register/change WebDAV address to send scanned data.
(2) Procedure
• A new address can be registered by touching [New].
• Select any displayed address to check, edit or delete the setting.
G. IP Address Fax
• Setting will be available only when [IP Address FAX] is set to “ON” in the following set-
tings.
[Administrator Settings] o [Network Settings] o [Network Fax Settings] o [Network Fax
Function Settings]
(1) Use
• To register/change the IP address fax destination when transmitting the IP address fax
data.
(2) Procedure
• A new address can be registered by touching [New].
• Select any displayed address to check, change or delete the setting.
H. Internet Fax
• Setting will be available only when [Internet FAX] is set to “ON” in the following settings.
[Administrator Settings] o [Network Settings] o [Network Fax Settings] o [Network Fax
Function Settings]
(1) Use
• To register/change the Internet fax address when transmitting the internet fax data.
(2) Procedure
•A ne
w address can be registered by touching [New].
• Select any displayed address to check, change or delete the setting.
10.4.2 Create One-Touch destination-Group
A. Use
• To register/change a group to send scanned data/fax data simultaneously.
B. Procedure
• A new address can be registered by touching [New].
• Select any displayed group to check, edit or delete them.
• At least one address must be registered for registering a new group.
Y110571-1 Service Manual
To Next Page