Olivetti d-COPIA 255MF - Assigning a Function to a Function Key

3-4
Preparation before Use > Assigning a Function to a Function Key
Assigning a Function to a Function Key
These keys enable various functions and applications, including copy and scan, to be registered. You can assign a
function or application to a function key for easy access to the applicable display screen.
The following functions are allocated to this machine but can be changed and register another function.
• [F1] (Function Key 1): Copy
• [F2] (Function Key 2): Send
• [F3] (Function Key 3): FAX (option)
1
Display a screen.
[System Menu / Counter key > [Common Settings] > [Function Key Assignment]
2
Configure the settings.
1 Select the function key whose setting you want to change.
NOTE
If the user authentication screen appears, enter your login user name and login password and select [Login].
For this, you need to log in with administrator privileges.
The factory default login user name and login password are set as shown below.
Login user name
d-COPIA 255MF:2500
Login Password
d-COPIA 255MF:2500