9-22
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
Simple Login Settings
The simple login function allows users to log in simply by selecting a user name. Users must be registered in advance to
use this functionality.
Enabling Simple Login
Select whether or not simple login is enabled.
1
Display the screen.
1 [System Menu / Counter] key > [User Login/Job Accounting]
2 [User Login Settings] > [Simple Login Settings] > [Simple Login]
2
Configure the settings.
Select [Off] or [On].
Simple Login Key
Register users to use simple login. You can add up to 20 users.
1
Display the screen.
1 [System Menu / Counter]key > [User Login/Job Accounting]
• For user registration, refer to the following:
Adding a User (Local User List)
(9-6)
• To use Simple Login, User Login Administration must be enabled in "User Login Settings".
Enabling User Login Administration
(9-4)
• When the guest authorization setting is enabled, the Simple Login screen is not displayed.
If the user authentication screen appears, enter your login user name and login password and select [Login].
For this, you need to log in with administrator privileges.
The factory default login user name and login password are set as shown below.
Login User Name
d-COPIA 255MF:2500
Login Password
d-COPIA 255MF:2500
If the user authentication screen appears, enter your login user name and login password and select [Login].
For this, you need to log in with administrator privileges.
The factory default login user name and login password are set as shown below.
Login User Name
d-COPIA 255MF:2500
Login Password
d-COPIA 255MF:2500
To Next Page