Olivetti d-COPIA 255MF - Copier;Printer Count Method Setting

9-42
User Authentication and Accounting (User Login, Job Accounting) > Using Job Accounting
Copier/Printer Count Method Setting
You can select management based on a count of the number of sheets used for copying and printing, management
based on individual counts. This setting changes the sheet use restriction and count method, so select the setting best
suited to your usage environment.
If the login user name entry screen appears during operations, log in by referring to the following:
Restricting the Use of the Machine
(9-30)
Counting the Number of Pages Printed (9-39)
Print Accounting Report (9-41)
1
Display the screen.
1 [System Menu / Counter] key > [User Login/Job Accounting]
2 [Job Accounting Settings] > [Default Setting] > [Copy/Printer Count]
2
On
1 Select [Total] or [Individual].
2 Select [OK].
NOTE
If the user authentication screen appears, enter your login user name and login password and select [Login].
For this, you need to log in with administrator privileges. The factory default login user name and login password
are set as shown below.
Login User Name
d-COPIA 255MF:2500
Login Password
d-COPIA 255MF:2500