Olivetti d-COPIA 255MF - Enabling Job Accounting; Job Accounting Access

9-28
User Authentication and Accounting (User Login, Job Accounting) > Enabling Job Accounting
Enabling Job Accounting
1
Display the screen.
1 [System Menu / Counter] key > [User Login/Job Accounting
2 [Job Accounting Settings] > [Job Accounting Settings]
2
Select [On].
Job Accounting Access
1
Display the screen.
1 [System Menu / Counter] key > [User Login/Job Accounting]
2 [Job Accounting Settings] > [Job Accounting Access]
2
Configure the settings.
Select [Local] or [Network].
NOTE
If the user authentication screen appears, enter your login user name and login password and select [Login].
For this, you need to log in with administrator privileges. The factory default login user name and login password
are set as shown below.
Login User Name
d-COPIA 255MF:2500
Login Password
d-COPIA 255MF:2500
NOTE
• To disable job accounting, select [Off].
• When the display returns to System Menu default screen, logout is automatically executed and the screen to
enter the Account ID appears. To continue the operation, enter the Account ID.
NOTE
If the user authentication screen appears, enter your login user name and login password and select [Login].
For this, you need to log in with administrator privileges. The factory default login user name and login password
are set as shown below.
Login User Name
d-COPIA 255MF:2500
Login Password
d-COPIA 255MF:2500
NOTE
To select [Network], network authentication must be enabled and [Ext.] must be selected for server type.
Enabling User Login Administration
(9-4)