Olivetti d-COPIA 255MF - Optional Applications; Starting Application Use

12-9
Appendix > Optional Equipment
Optional Applications
The applications listed below are installed on this machine.
*1 This can be used on a trial basis for a limited time.
Starting Application Use
1
Display the screen.
[System Menu / Counter] key > [System/Network] > Optional Function
2
Select the desired application > [Activate].
You can view detailed information on the selected application by selecting [ ].
3
[Official] > [Next >] > Input the license key. > [OK]
Some applications do not require you to enter a license key. If the license key entry screen does not appear, go to
Step 4.
To use the application as a trial, select [Trial] without entering the license key.
4
Select [Yes] in the confirmation screen.
Application
Data Security Kit
Card Authentication Kit
*1
ThinPrint Option
*1
NOTE
• Restrictions such as the number of times the application can be used during the trial period differ depending
on the application.
• If you change the date/time while using the trial version of an application, you will no longer be able to use the
application.
NOTE
If the user authentication screen appears, enter your login user name and login password and select [Login].
For this, you need to log in with administrator privileges.
The factory default login user name and login password are set as shown below.
• Login user name
d-COPIA 255MF:2500
• Login Password
d-COPIA 255MF:2500
NOTE
• If you started the Data Security Kit or ThinPrint Option and entered the license key, you need to turn power
OFF and then back ON again.
• Icons of activated application are displayed in the Home screen.