FAX Operation (Basic)
3-6 OPERATION GUIDE
Direct Transmission (When originals are placed in
the document processor)
After the telephone line has connected with the
receiving system, scanning of the originals placed in the
document processor starts. When multiple-page
originals are placed, each page is scanned after the
previous one is sent.
Direct Transmission (When originals are placed on
the glass surface)
This method is suitable for sending book originals that
cannot be placed in the document processor. After the
telephone line has connected with the receiving system, the
originals placed on the glass surface are scanned and sent.
NOTE: When continuous scan is set, you can
continue with scanning of a next original after an
original on the glass surface has been sent. Every time
one page is scanned, you perform an operation to
allow continued scanning.
Placing Originals
3 Place the originals on the glass surface or in the
optional document processor. Refer to the
machine’s Operation Guide for placing originals.
Dial the Receiving System
4
1 Press [FAX No. Entry].
NOTE: When you press the numeric keys to enter
numbers, the screen changes to the entry screen
for the fax number (the screen shown in the next
step).
Status
08/08/2009 10:10
Original/Sending
Data Format
Quick SetupDestination Image Quality Advanced
Setup
Destination Detail
A OFFICE
1234567890
Address
Book
Folder Path
Entry
E-mail
Addr Entry
No.
1/100
AAA BBB CCC DDD EEE
FFF GGG HHH III JJJ
00040003 00050001 0002
0006 0007 0008 0009 0010
1/1
i-FAX
Addr Entry
FAX No.
Entry
WSD Scan
Place original.
Ready to send.
Destination
B OFFICE
1234568907
C OFFICE
1234569078
Direct Delete RecallOn Hook Chain Detail/Edit
To Next Page
Loading...
