Olivetti d-Copia 5002MF - Page 263

12-19
Appendix > Received FAX Sizes and Paper Priority (Inch Model)
Reduced RX Sizes
If [On] is set for Reduced RX Size, the printing paper is chosen by prioritizing to reduce the paper size and print data on
single paper.
Reduced RX Size (page 4-7)
Received FAX Size
Priority
Statement Letter Letter Legal Ledger Letter Long
Originals
*1
*1 Letter Long Originals: Originals longer than Letter in the direction of the paper feed.
Legal Long
Originals
*2
*2 Legal Long Originals: Originals longer than Legal in the direction of the paper feed.
Ledger Long
Originals
*3
*3 Ledger Long Originals: Originals longer than Ledger in the direction of the paper feed.
Paper Size
1 Statement
*4
*4 Paper orientation is different from the received document. The image is printed after being rotated 90°automatically.
Letter Letter Legal Ledger Ledger Legal Ledger
2 Letter Letter
*4
Letter
*4
Letter Letter
*6
Ledger Ledger Letter
3 Legal Legal Legal
*4
Letter
*4
Letter
*4
,
*6
Letter Ledger Letter
*4
4 Letter
*4
Ledger Ledger Ledger Legal
*6
Letter
*4
Letter
*5
*5 The document is printed on this paper when the length of the document received is 376.6 to 379.3 mm and the cas-
sette set as the Legal size is empty.
Legal
*4
5 Ledger Statement
*6
*6 The data received is reduced to fit the paper size and then printed.
indicates print output on two sheets.
Statement
*4
,
*6
Statement
*4
Statement
*4
Letter
6 Letter
*4
,
*5
7 Letter
*4
8 Statement
*4
NOTE
When a paper type is selected in [Media Type], a received fax is printed using the matching paper source.
Media Type for Print Output (page 4-6)
Even if [Media Type] is selected, a received fax cannot be printed when the paper type loaded in the paper source is
not suitable for fax printouts.