3-6
Sending Faxes > Basic transmission procedure
Cancelling Transmission (Disconnection of Communication)
Follow this procedure to break the connection and stop communication.
1
Select the [Status/Job Cancel] key.
2
Disconnection of communication.
[Fax Communication Status] > "FAX (Port 1)" or "FAX (Port 2)" [Line Off]
To cancel direct transmission, refer to the following:
To cancel a delayed transmission or send a fax by immediate transmission, refer to the following:
To cancel polling transmission, refer to the following:
Even if transmission is canceled, there is a possibility that pages scanned prior to cancelation were sent to the
receiving party. Check with the receiving party to see if pages were accidentally sent.
When 2 optional FAX Kits (Dual FAX option) are installed, disconnect the line currently being used for communication.
To cancel direct transmission, delayed transmission, or polling transmission, refer to the
section for that function.
Cancelling Direct Transmission (page 3-30)
Cancelling Delayed Transmissions (Queued) (page 3-29)
Polling Reception (page 5-32)
To Next Page
Loading...
