4-4
Receiving Faxes > Manual Reception
Manual Reception
This method allows you to receive faxes by selecting [Manual RX] after confirming that the telephone line has
connected to the sending system.
Flow of manual reception
1
The machine receives a call.
When the machine receives a call, it rings.
2
Display the screen.
[Status/Job Cancel] key > [Fax Communication Status]
3
Select [Manual RX].
Reception will start.
To use Manual Reception, you need to change the receiving mode to Manual Reception. To change to manual mode,
refer to the following:
RX Setting (page 8-13)
Connecting a telephone set (commercially available product) to this machine enables you to receive originals after
talking to the person at the sending system.
Manual Reception (page 5-49)
To Next Page
