Olivetti SD-505 - Page 17

Field Service Ver. 2.0 Jan. 2008 3. Other
13
SD-505Maintenance
21. Remove eight screws [1], and
remove the lower cover [2].
22. Remove the wire saddle and discon-
nect the connector.
23. Remove three screws [1], and
remove the clincher 1 [2].
24. Remove the staple cartridge 1 [1].
25. Remove four screws [1], and remove
the stapler 1 [2].
NOTE
• To replace clincher 2 and stapler 2,
repeat steps 22 to 25.
4511F2C523DA
[2]
[1]
[1]
[1]
[1]
4511F2C524DA
[2]
[1]
4511F2C525DA
[1]
4511F2C526DA
[1]
[2]
Y108482-2 Service Manual