Olympus BH2 Series - B2-BIC Unit Disassembly

10-1-4 Disassemble 'B2-BI Unit from B2-BIC Unit
by removing four Screws CUK3x6SA.
(See Fig. 10-4)
Fig. 10-4
10-2 Disassemble B2-BIC Unit as follows:
10-2-1 Disassemble Prism Mount AB032900 from
Body AB033000 by removing three Screws
CUK3x8SA. (See Fig. 10-5)
Fig. 10-5
- ---
- - - - - - - - -
- -. --- -- - -,
10-2-2 Remove P2 LP093900 from Prism Mount
CP093900
AB032900:
1 a) After loosening two Screws HU3x4SA,
remove the Adhesive OT1028 (Araldite).
(See Fig. 10-6)
Fig. 106