Olympus BH2 Series - Page 57

.I ---
-- -
10-3 Disassemble B2-BI Unit as follows:
10-3-1 Remove Spring AB031200 from the constant
tube length device:
a) Remove Spring Hanger AB032800.
b) Remove Spring AB031200from each Key
AB031800, (See Fig. 10-7)
Fig. 30-7
1
10-3-2 Remove two Keys AB031800. (See Fig. 10-8)
Fig. 10-8
I 10-3-3 Rernovn Prisms P3 and P4:
a) Prism Mount and Prisms R3, P4 23538700
I
H K3x5SA
crrn ho disassembled by removing two
/ Screws H K3x5SA. (See Fig. 10-9)
b)
Do not remove Prism P3, P4 from Prism
mount.
Fig. 10-9